Precision Pure PWS 8-8

Automatic Family Size Water Distiller

For automatic family size convenience, the Precision Pure 8-8 Distiller’s, hands-off, fully automatic operation is designed with a busy customer in mind. This automatic distiller allows you to go about your busy day, with the secure feeling that when you need it, 8 gallons of the purest steam distilled drinking water is available at your finger tips, without the extra work and inconvenience of handling bottles. The outstanding features of this advanced design include: being constructed with high quality, easy to clean, mirror finish stainless steel; a user-friendly, easy to change and long lasting charcoal filter; and ¾” impurities drain system*. Combine these outstanding features with the optional pump kit and automatic drain and your busy schedule will just have become easier.

Precision Pure PWS 8-8 Water Distiller is a result of over 25 years of distillation manufacturing experience. Its features and benefits provide the very best water system for steamed distilled drinking water requirements. The Precision Pure PWS 8-8 provides safe, pure water at home for a fraction of the cost of bottled water.

Precision Pure PWS 8-8 Water Distiller duplicates nature’s own method of purifying water. This highly reliable process of purifying water combines distillation with a high capacity activated carbon filter providing clean, great tasting water.

Your Precision Pure PWS 8-8 is the most advanced water distiller on the marked today. It is designed with many user-friendly features.


1. Your water distiller is connected to your household water supply. The raw water feeds in the distiller through a 1/4” water line (1). This line is connected to a quick connect plumbing fitting. As the raw water enters the distiller it passes through a long life, stainless steel, sealed solenoid and then directly through the boil chamber (2).

2. After the water reaches a level over the heating element (3), the distiller starts the heading cycle and brings the water to a boil. The pure steam (4), rises and enters the baffle system (5) which breaks down any foaming in the boiler should it occur.

3. Any volatile gasses are released through a special gas release vent at the highest point in the cooler system (6). The pure steam passes through the condenser coil (7). To support the cooling cycle a fan is used to properly cool the steam (8).

4. Pure water enters the stainless steel charcoal filter (9). This filter is 2/3 filled with activated coconut charcoal, which should be changed semi annually.

5. Finally, distilled water leaves the charcoal filter and runs into the high capacity stainless steel storage tank (10).

6. As the distilled water enters the storage tank, the water lifts the pump control switch and activates the optional pump (11) to deliver distilled water to any combination of accessory faucet ice maker or humidifier.

7. The distiller will continue to run until the water reaches the top of the storage tank and lifts the upper float (12) and turns itself off. As soon as the distiller shuts off, the automatic electric drain valve system (15) is equipped, automatically drains the impurities. As soon as you have used approximately 1/3 of the capacity of the tank the stainless steel stem float (13) will turn on the distiller and close the automatic drain valve (15) in order to fill the boiling tank and start the distilling cycle again.

8. The demand pump system (11), if equipped connects to the bottom of the storage tank and electrically plugs into the bottom of the distiller head (16). The pump is protected by a built in fuse and a low level shut off float (14).
Copyright © 2000-04 LIFETIME HOME PRODUCTS EXETER
213 Carling Street Exeter, Ontario N0M 1S2
TEL: 519-235-0699 | 1-800-529-9292
FAX: 519-235-2882