Symptoms will vary depending on the amount of iron and sulphur in your water but good indications you need a PROVECTR system are bad smelling water (a "rotten egg" smell), bad tasting water, "coloured" water, and rust/iron stains on fixtures, tubs, skinks and laundry.

The Provectr Water Treatment System removes sediment, iron, manganese and sulfur form your water. Your water will be fresh and clear, your plumbing fixtures will be free of rust stains and your clothes will look brighter.

The Provectr Water Treatment System does not use any chemicals in removing these problems from your water. Natural reactions are achieved through aeration and filtration that completely remove iron, sulfur, sediment and neutralize low pH.

Raw water is pumped through your system by a submersible pump. Because sufficient flow and pressure are needed for the system to operate effectively, a submersible pump is strongly recommended as a prerequisite to installing the PROVECTR system. A pressure gauge in the line after the pump will let you know if proper pressure is being maintained.

The Venturi/Nozzle, placed in the line between the pressure gauge and the pressure tank, is where the process of removing unwanted elements begins. As the water is forced through the Venturi/Nozzle under pressure, a vacuum is created that draws air into the water line. This air and water are mixed, thus starting the oxidation process that converts “dissolved solids” into “suspended solids” that can be filtered out of the water.

After leaving the Venturi/Nozzle, the water and air mixture may enter the pressure tank to be stored until it is needed.